PartsTable
Technical Data Sheet
12-620 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

Sandberg USB Conference Desk Microphone is the perfect microphone for the office or meeting room. Place the flat sturdy microphone in the center of the table. Here it will pick up all voices around the table, and transmit them clearly to the online meeting participants.

Connects to USB in a PC and works instantly without driver installation. The microphone works also perfectly in combination with a speaker set. This way you can conduct your online meetings without the need of waring the often annoying headset.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5930-00-250-5089, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 12-620
NSN: 5930-00-250-5089
FSC: 5930
CAGE: 87557 — LOCKHEED CORP LOCKHEED ELECTRONICS CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
base_styleMEDIUM SCREW
body_styleRECTANGULAR W/MOUNTING HOLES/SLOTS
body_width0.170 INCHES NOMINAL IN
bulb_styleA (ARBITRARY DESIGNATION)
body_height0.375 INCHES NOMINAL IN
body_length0.420 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.080 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
overall_width0.281 INCHES NOMINAL IN
actuator_styleROUND
NSN5930-00-250-5089
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Sandberg RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 12-620 MFR Sandberg RESISTOR,VARIABLE,WIRE
KEY FEATURES
MOUNTING METHOD: UNTHREADED HOLE(S)
ACTUATOR DIAMETER: 0.094 INCHES NOMINAL IN
ACTUATOR MOVEMENT: 0.031 PRETRAVEL INCHES MAXIMUM AND 0.025 OVERTRAVEL INCHES MINIMUM AND 0.007 DIFFERENTIAL INCHES MAXIMUM
NONPILE-UP CONTACT ARRANGEMENT: 1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
SWITCH RELEASE FORCE: 1.5 OUNCES MINIMUM OZ
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
ACTUATOR DIAMETER0.094 INCHES NOMINAL IN
ACTUATOR MOVEMENT0.031 PRETRAVEL INCHES MAXIMUM AND 0.025 OVERTRAVEL INCHES MINIMUM AND 0.007 DIFFERENTIAL INCHES MAXIMUM
NONPILE-UP CONTACT ARRANGEMENT1 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
SWITCH RELEASE FORCE1.5 OUNCES MINIMUM OZ
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.625 INCHES NOMINAL IN
OVERALL HEIGHT0.909 INCHES NOMINAL IN
OVERALL LENGTH1.625 INCHES NOMINAL IN
ACTUATOR HEIGHT0.071 INCHES NOMINAL IN
BODY LENGTH1.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
2A54Interchangeable
interchangeable cross-reference
interchangeable
2A0054Interchangeable
interchangeable cross-reference
interchangeable
260-0839-00Interchangeable
interchangeable cross-reference
interchangeable
SAA102Interchangeable
interchangeable cross-reference
interchangeable
0490-0910Interchangeable
interchangeable cross-reference
interchangeable
869029-2302Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12-620?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12-620?
12-620 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 12-620?
There are 22 known substitutes for 12-620: 2A54, 2A0054, 260-0839-00 and 19 more. Substitute compatibility should be verified for your specific system.
Is 12-620 still available?
12-620 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12-620