PartsTable
Technical Data Sheet
PartsTable / MRO / 12-455
12-455 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include mounting_position: BODY TOP, end_item_identification: F/A-22 RAPTOR, part_name_assigned_by_controlling_agency: PANEL ASSY,ROOF,REA 21N. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-7835, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 12-455
NSN: 5330-00-171-7835
FSC: 5330
CAGE: 35650 — LEKTRA SERVICE CORP (USA)
SPECIFICATIONS
mounting_positionBODY TOP
end_item_identificationF/A-22 RAPTOR
part_name_assigned_by_controlling_agencyPANEL ASSY,ROOF,REA 21N
NSN5330-00-171-7835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12-455 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 2.219 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.350 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT A
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER2.219 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.350 INCHES NOMINAL IN
CASE STYLESQUARE
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
8442-3Interchangeable
interchangeable cross-reference
interchangeable
49292Interchangeable
interchangeable cross-reference
interchangeable
D636458-11Interchangeable
interchangeable cross-reference
interchangeable
D6364-1-120Interchangeable
interchangeable cross-reference
interchangeable
65X1496Interchangeable
interchangeable cross-reference
interchangeable
7542BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12-455?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12-455?
12-455 is a COIL,RADIO FREQUENCY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 12-455?
There are 23 known substitutes for 12-455: 8442-3, 49292, D636458-11 and 20 more. Substitute compatibility should be verified for your specific system.
Is 12-455 still available?
12-455 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12-455

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026