PartsTable
Technical Data Sheet
PartsTable / MRO / 12-384
12-384 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include head_style: FLAT FILLISTER, shoulder_shape: ROUND FASTENER, thread_direction: RIGHT-HAND, internal_drive_style: SLOT, end_item_identification: F-35 SUPPORT EQUIPMENT, part_name_assigned_by_controlling_agency: ARM CAP SCREW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-367-1812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 12-384
NSN: 5999-01-367-1812
FSC: 5999
CAGE: 56271 — KIRKHILL-TA (USA)
SPECIFICATIONS
head_styleFLAT FILLISTER
shoulder_shapeROUND FASTENER
thread_directionRIGHT-HAND
internal_drive_styleSLOT
end_item_identificationF-35 SUPPORT EQUIPMENT
part_name_assigned_by_controlling_agencyARM CAP SCREW
NSN5999-01-367-1812
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 12-384 MFR RESISTOR,VARIABLE,NONWIRE WOUND,
KEY FEATURES
•
MINOR HEIGHT: 0.141 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 5.990 INCHES MINIMUM AND 6.010 INCHES MAXIMUM IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT RF SHIELDING GASKET
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
MINOR WIDTH: 0.141 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH15.180 INCHES MINIMUM AND 15.200 INCHES MAXIMUM IN
MINOR HEIGHT0.141 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH24.180 INCHES MINIMUM AND 24.200 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH5.990 INCHES MINIMUM AND 6.010 INCHES MAXIMUM IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT RF SHIELDING GASKET
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
MINOR WIDTH0.141 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.141 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEMESH AND COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
120399Interchangeable
interchangeable cross-reference
interchangeable
12384Interchangeable
interchangeable cross-reference
interchangeable
2018CInterchangeable
interchangeable cross-reference
interchangeable
F124Interchangeable
interchangeable cross-reference
interchangeable
0124-024Interchangeable
interchangeable cross-reference
interchangeable
4D121Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 12-384?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12-384?
12-384 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 12-384?
There are 14 known substitutes for 12-384: 120399, 12384, 2018C and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12-384?
12-384 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-367-1812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12-384

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026