PartsTable
Technical Data Sheet
Download PDF

12-07279 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12-07279: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304, overall_height: 2.204 INCHES NOMINAL IN, overall_length: 13.470 INCHES MINIMUM AND 17.408 INCHES MAXIMUM IN, special_features: SPRING ASSIST OPEN AND HOLD CLOSED, features_provided: MOUNTING PAD, end_item_identification: CONTROL UNIT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-621-6594, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12-07279
NSN: 5340-01-621-6594
FSC: 5340 — Hardware, Commercial
CAGE: 25693 — MEGGITT SAFETY SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 304
overall_height2.204 INCHES NOMINAL IN
overall_length13.470 INCHES MINIMUM AND 17.408 INCHES MAXIMUM IN
special_featuresSPRING ASSIST OPEN AND HOLD CLOSED
features_providedMOUNTING PAD
mounting_hole_quantity5
end_item_identificationCONTROL UNIT
part_name_assigned_by_controlling_agencyLID SUPPORT,HYDRAULIC
NSN5340-01-621-6594
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12-07279 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
FEATURES PROVIDED: MOUNTING PAD
•
MATERIAL: STEEL COMP 304
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
OVERALL HEIGHT2.204 INCHES NOMINAL IN
OVERALL LENGTH13.470 INCHES MINIMUM AND 17.408 INCHES MAXIMUM IN
FEATURES PROVIDEDMOUNTING PAD
SPECIAL FEATURESSPRING ASSIST OPEN AND HOLD CLOSED
PART NAME ASSIGNED BY CONTROLLING AGENCYLID SUPPORT,HYDRAULIC
END ITEM IDENTIFICATIONCONTROL UNIT
MATERIALSTEEL COMP 304
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
11615A15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 12-07279?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12-07279?
12-07279 is a BRACKET,MOUNTING.
What parts can replace 12-07279?
There is 1 known substitute for 12-07279: 11615A15. Substitute compatibility should be verified for your specific system.
What is the NSN for 12-07279?
12-07279 is cataloged in the U.S. Government catalog under NSN 5340-01-621-6594. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12-07279