PartsTable
Technical Data Sheet
PartsTable / MRO / 11P
11P ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include body_length: 9.250 INCHES NOMINAL IN, jaw_capacity: 3.000 INCHES NOMINAL IN, throat_depth: 2.938 INCHES NOMINAL IN, body_diameter: 1.750 INCHES NOMINAL IN, terminal_type: BRACKET, inclosure_type: UNINCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-232-0109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11P
NSN: 5340-00-232-0109
FSC: 5340
CAGE: 35281 — DOMINION LOCK CO LTD (CAN)
SPECIFICATIONS
body_length9.250 INCHES NOMINAL IN
jaw_capacity3.000 INCHES NOMINAL IN
throat_depth2.938 INCHES NOMINAL IN
body_diameter1.750 INCHES NOMINAL IN
terminal_typeBRACKET
inclosure_typeUNINCLOSED
terminal_length1.750 INCHES NOMINAL IN
special_featuresBRASS OR NICKEL SILVER
style_designatorAXIAL TERMINAL EACH END
locking_clamp_typePIPE
mounting_hole_size0.469 INCHES NOMINAL IN
closed_overall_length11.000 INCHES NOMINAL IN
NSN5340-00-232-0109
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBRASS OR NICKEL SILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
11PInterchangeable
interchangeable cross-reference
interchangeable
528AMInterchangeable
interchangeable cross-reference
interchangeable
55PInterchangeable
interchangeable cross-reference
interchangeable
1768PXInterchangeable
interchangeable cross-reference
interchangeable
A1117PInterchangeable
interchangeable cross-reference
interchangeable
P505NXSTDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11P?
11P is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11P?
There are 10 known substitutes for 11P: 11P, 528AM, 55P and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11P?
11P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-232-0109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026