PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11JCS222PC86
11JCS222PC86 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.188 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-0635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11JCS222PC86
NSN: 5310-00-014-0635
FSC: 5310
CAGE: 04579 — AURORA PUMP A UNIT OF GENERAL SIGNAL CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.188 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.500 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch18
nondefinitive_spec/std_dataA TYPE
departure_from_cited_documentAS MODIFIED BY NUT HEIGHT
NSN5310-00-014-0635
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11JCS222PC86 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.188 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 18
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY NUT HEIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.188 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.500 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH18
NOMINAL THREAD SIZE0.312 INCHES IN
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY NUT HEIGHT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
200-1406-45-01-02Interchangeable
interchangeable cross-reference
interchangeable
15036Interchangeable
interchangeable cross-reference
interchangeable
1406-52Interchangeable
interchangeable cross-reference
interchangeable
140635Interchangeable
interchangeable cross-reference
interchangeable
55263Interchangeable
interchangeable cross-reference
interchangeable
55263BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11JCS222PC86?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11JCS222PC86?
11JCS222PC86 is a NUT,PLAIN,HEXAGON.
What parts can replace 11JCS222PC86?
There are 10 known substitutes for 11JCS222PC86: 200-1406-45-01-02, 15036, 1406-52 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11JCS222PC86?
11JCS222PC86 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-014-0635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11JCS222PC86

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026