PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11H15
11H15 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include angle: 45.0 DEGREES, height: 0.875 INCHES NOMINAL IN, material: STEEL OVERALL, shank_length: 0.250 INCHES NOMINAL IN, special_features: FORKLIFTC300-40, style_designator: ANGLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-019-1456, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11H15
NSN: 4730-00-019-1456
FSC: 4730
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
angle45.0 DEGREES
height0.875 INCHES NOMINAL IN
materialSTEEL OVERALL
shank_length0.250 INCHES NOMINAL IN
special_featuresFORKLIFTC300-40
style_designatorANGLE
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.125 INCHES IN
thread_quantity_per_inch27
assembly_clearance_radius0.375 INCHES NOMINAL IN
screw_thread_series_designatorNPTF
NSN4730-00-019-1456
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 11H15 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT: 0.875 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
ANGLE: 45.0 DEGREES
•
THREAD QUANTITY PER INCH: 27
•
SCREW THREAD SERIES DESIGNATOR: NPTF
•
ASSEMBLY CLEARANCE RADIUS: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESFORKLIFTC300-40
HEIGHT0.875 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.125 INCHES IN
ANGLE45.0 DEGREES
THREAD QUANTITY PER INCH27
SCREW THREAD SERIES DESIGNATORNPTF
ASSEMBLY CLEARANCE RADIUS0.375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
LT2-65Interchangeable
interchangeable cross-reference
interchangeable
PA43716AInterchangeable
interchangeable cross-reference
interchangeable
56994Interchangeable
interchangeable cross-reference
interchangeable
00711-H-15Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11H15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11H15?
11H15 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 11H15?
There are 4 known substitutes for 11H15: LT2-65, PA43716A, 56994 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11H15?
11H15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-019-1456. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11H15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026