PartsTable
Technical Data Sheet
Download PDF

11B5091869 — RETAINER,SEAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11B5091869: RETAINER,SEAL.

The RETAINER,SEAL is a the manufacturer industrial component. Key specifications include construction: ONE-PIECE, overall_height: 0.060 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, overall_length: 80.875 INCHES NOMINAL IN, bolt_hole_diameter: 0.114 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN, bolt_hole_quantity: 30, mounting_flange_width: 1.19 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-707-5514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11B5091869
NSN: 5330-01-707-5514
NIINs: 017075514, 017246721
FSC: 5330 — Packing and Gasket Materials
CAGE: 5B5M3 — DEVCOM CHEMICAL BIOLOGICAL CENTER DBA CHEMICAL BIOLOGICAL CENTER DIV U.S. DEPT OF ARMY (USA)
SPECIFICATIONS
constructionONE-PIECE
overall_height0.060 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
overall_length80.875 INCHES NOMINAL IN
bolt_hole_diameter0.114 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
bolt_hole_quantity30
mounting_flange_width1.19 INCHES NOMINAL IN
end_item_identification4940-01-601-1928
part_name_assigned_by_controlling_agencyGASKET AND SEAL RETAINER,MODIFIED
NSN5330-01-707-5514
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11B5091869 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE DIAMETER: 0.114 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
•
MOUNTING FLANGE WIDTH: 1.000 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 30
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.060 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
BOLT HOLE DIAMETER0.114 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
OVERALL LENGTH175.560 INCHES MINIMUM AND 175.940 INCHES MAXIMUM IN
MOUNTING FLANGE WIDTH1.000 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
BOLT HOLE QUANTITY30
END ITEM IDENTIFICATION4940-01-680-2383
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES 1
11B5091869-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11B5091869?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11B5091869?
11B5091869 is a RETAINER,SEAL.
What parts can replace 11B5091869?
There is 1 known substitute for 11B5091869: 11B5091869-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 11B5091869?
11B5091869 is cataloged in the U.S. Government catalog under NSN 5330-01-707-5514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11B5091869