PartsTable
Technical Data Sheet
Download PDF

11B4600392-36 — DRILL,TWIST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

11B4600392-36: DRILL,TWIST.

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 3.875 INCHES NOMINAL IN, overall_length: 5.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-01-537-9176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11B4600392-36
NSN: 5133-01-537-9176
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 5B5M3 — DEVCOM CHEMICAL BIOLOGICAL CENTER DBA CHEMICAL BIOLOGICAL CENTER DIV U.S. DEPT OF ARMY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.875 INCHES NOMINAL IN
flute_quantity2
overall_length5.250 INCHES NOMINAL IN
special_featuresJOBBERS LG; LETTER SIZE Z
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.4130 INCHES IN
cutting_rotation_directionRIGHT-HAND
specification/standard_data05047-B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5133-01-537-9176
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DRILL,TWIST TITLE COMPONENT PN 11B4600392-36 MFR DRILL,TWIST
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 3.875 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.4130 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STRAIGHT ROUND
•
FLUTE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH3.875 INCHES NOMINAL IN
OVERALL LENGTH5.250 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.4130 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTRAIGHT ROUND
FLUTE QUANTITY2
SPECIAL FEATURESJOBBERS LG; LETTER SIZE Z
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
2002 ZReference document
Same NSN cross-reference
Reference document — Secondary reference
C02069Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11B4600392-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11B4600392-36?
11B4600392-36 is a DRILL,TWIST.
What parts can replace 11B4600392-36?
There are 2 known substitutes for 11B4600392-36: 2002 Z, C02069. Substitute compatibility should be verified for your specific system.
What is the NSN for 11B4600392-36?
11B4600392-36 is cataloged in the U.S. Government catalog under NSN 5133-01-537-9176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11B4600392-36

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.