PartsTable
Technical Data Sheet
Download PDF

11B3512505 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11B3512505: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.609 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-614-1286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11B3512505
NSN: 5310-01-614-1286
FSC: 5310 — Nuts and Washers
CAGE: 1U0N7 — FASTENAL COMPANY DBA FASTENAL CO DIV ILMON (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.609 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats1.093 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
nominal_thread_size0.75 INCHES IN
bearing_surface_typeCHAMFERED
end_item_identification4940-01-591-0265
thread_quantity_per_inch10
NSN5310-01-614-1286
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11B3512505 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.093 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.75 INCHES IN
•
NUT HEIGHT: 0.609 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.093 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.75 INCHES IN
NUT HEIGHT0.609 INCHES MINIMUM AND 0.664 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATION4940-01-591-0265
THREAD QUANTITY PER INCH10
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
11B3512509Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11B3512505?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11B3512505?
11B3512505 is a NUT,PLAIN,HEXAGON.
What parts can replace 11B3512505?
There is 1 known substitute for 11B3512505: 11B3512509. Substitute compatibility should be verified for your specific system.
What is the NSN for 11B3512505?
11B3512505 is cataloged in the U.S. Government catalog under NSN 5310-01-614-1286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11B3512505