The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 0.15 RADIANS MINIMUM AND 0.25 RADIANS MAXIMUM, first_leg_style: CORNER RADIUS, first_leg_width: 1.7200 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN, first_leg_length: 1.9700 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-459-1345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11B252070-1
NSN:5340-01-459-1345 FSC:5340 — Hardware, Commercial CAGE:59678 — COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER DBA US ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND ARMAMENTS CENTER (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
first_leg_angle
0.15 RADIANS MINIMUM AND 0.25 RADIANS MAXIMUM
first_leg_style
CORNER RADIUS
first_leg_width
1.7200 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
first_leg_length
1.9700 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
1.7200 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
style_designator
ANGLE
second_leg_length
0.1970 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
surface_treatment
ANODIZE
mounting_hole_type
PLAIN
first_leg_thickness
0.2500 INCHES NOMINAL IN
NSN
5340-01-459-1345
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.4400 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 0.15 RADIANS MINIMUM AND 0.25 RADIANS MAXIMUM
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.5000 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.1920 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171, FINISH 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.4400 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM IN
FIRST LEG ANGLE
0.15 RADIANS MINIMUM AND 0.25 RADIANS MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.5000 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.1920 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-STD-171, FINISH 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS
0.3600 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM IN
SECOND LEG WIDTH
1.7200 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11B252070-1?
11B252070-1 is a BRACKET,ANGLE.
What parts can replace 11B252070-1?
There is 1 known substitute for 11B252070-1: 11B252070. Substitute compatibility should be verified for your specific system.
What is the NSN for 11B252070-1?
11B252070-1 is cataloged in the U.S. Government catalog under NSN 5340-01-459-1345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.