PartsTable
Technical Data Sheet
Download PDF

119A2-M-202 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

119A2-M-202: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include end_item_identification: ASW (AUXILIARY SEA WATER) PUMP, part_name_assigned_by_controlling_agency: CAP SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-805-0407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119A2-M-202
NSN: 5305-00-805-0407
NIINs: 008050407, 015960193
FSC: 5305 — Screws
CAGE: 88032 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
end_item_identificationASW (AUXILIARY SEA WATER) PUMP
part_name_assigned_by_controlling_agencyCAP SCREW
NSN5305-00-805-0407
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 119A2-M-202 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.375 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 1.250 INCHES MINIMUM IN
•
HARDNESS RATING: 27.0 ROCKWELL C MINIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286,CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
HEAD HEIGHT0.375 INCHES NOMINAL IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH1.250 INCHES MINIMUM IN
HARDNESS RATING27.0 ROCKWELL C MINIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286,CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURES0.141 IN. DIA NYLON PELLET LOCKING DEVICE MIL-F-18240 LOCATED 0.219 IN. FROM THD END TO CENTER OF PELLET IN
SUBSTITUTES & CROSS-REFERENCES 1
1996627-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 119A2-M-202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119A2-M-202?
119A2-M-202 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 119A2-M-202?
There is 1 known substitute for 119A2-M-202: 1996627-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 119A2-M-202?
119A2-M-202 is cataloged in the U.S. Government catalog under NSN 5305-00-805-0407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119A2-M-202

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.