PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 119935
119935 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 0.5080 INCHES MINIMUM AND 0.5120 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.1880 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN, body_outside_diameter: 0.2500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-392-1821, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119935
NSN: 5310-00-392-1821
FSC: 5310
CAGE: 70408 — AT AND T CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length0.5080 INCHES MINIMUM AND 0.5120 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.1880 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM IN
body_outside_diameter0.2500 INCHES NOMINAL IN
material_document_and_classificationWW-T-700/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-392-1821
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 119935 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.600 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
HOLE DIAMETER: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.600 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
HOLE DIAMETER0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
P005303Interchangeable
interchangeable cross-reference
interchangeable
112935Interchangeable
interchangeable cross-reference
interchangeable
119935Interchangeable
interchangeable cross-reference
interchangeable
8331239Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 119935?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119935?
119935 is a SPACER,SLEEVE.
What parts can replace 119935?
There are 4 known substitutes for 119935: P005303, 112935, 119935 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 119935?
119935 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-392-1821. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119935

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026