PartsTable
Technical Data Sheet
Download PDF

119905 — STANDOFF,THREADED,SPACING

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

119905: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a Hama industrial component. Key specifications include length: 0.331 INCHES MINIMUM AND 0.331 INCHES MINIMUM AND 0.335 INCHES MAXIMUM0.335 INCHES MAXIMUM IN, diameter: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, material: STEEL COMP 303 OVERALLSTEEL COMP 303 OVERALL, groove_width: 0.030 INCHES MAXIMUM0.030 INCHES MAXIMUM IN, thread_length: 0.190 INCHES NOMINAL RIGHT EXTERNAL0.190 INCHES NOMINAL RIGHT EXTERNAL IN, groove_diameter: 0.103 INCHES MINIMUM0.103 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-012-3519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119905
NSN: 5340-01-012-3519
FSC: 5340 — Hardware, Commercial
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
length0.331 INCHES MINIMUM AND 0.331 INCHES MINIMUM AND 0.335 INCHES MAXIMUM0.335 INCHES MAXIMUM IN
diameter0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALLSTEEL COMP 303 OVERALL
groove_width0.030 INCHES MAXIMUM0.030 INCHES MAXIMUM IN
thread_length0.190 INCHES NOMINAL RIGHT EXTERNAL0.190 INCHES NOMINAL RIGHT EXTERNAL IN
groove_diameter0.103 INCHES MINIMUM0.103 INCHES MINIMUM IN
shoulder_length0.575 INCHES MINIMUM AND 0.575 INCHES MINIMUM AND 0.579 INCHES MAXIMUM0.579 INCHES MAXIMUM IN
shoulder_diameter0.1872 INCHES MINIMUM AND 0.1872 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM0.1875 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALLPASSIVATE OVERALL
cross-sectional_shapeROUNDROUND
distance_from_end_to_hole_center0.090 INCHES MINIMUM AND 0.090 INCHES MINIMUM AND 0.210 INCHES MAXIMUM0.210 INCHES MAXIMUM IN
hole_quantity_perpendicular_to_axis11
NSN5340-01-012-3519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 119905 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.331 INCHES MINIMUM AND 0.331 INCHES MINIMUM AND 0.335 INCHES MAXIMUM0.335 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35, TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35, TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
GROOVE DIAMETER: 0.103 INCHES MINIMUM0.103 INCHES MINIMUM IN
•
THREAD LENGTH: 0.190 INCHES NOMINAL RIGHT EXTERNAL0.190 INCHES NOMINAL RIGHT EXTERNAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE: ROUNDROUND
•
SHOULDER DIAMETER: 0.1872 INCHES MINIMUM AND 0.1872 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM0.1875 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.331 INCHES MINIMUM AND 0.331 INCHES MINIMUM AND 0.335 INCHES MAXIMUM0.335 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35, TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35, TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
GROOVE DIAMETER0.103 INCHES MINIMUM0.103 INCHES MINIMUM IN
THREAD LENGTH0.190 INCHES NOMINAL RIGHT EXTERNAL0.190 INCHES NOMINAL RIGHT EXTERNAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTM A582, TYPE 303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUNDROUND
SHOULDER DIAMETER0.1872 INCHES MINIMUM AND 0.1872 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM0.1875 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALLPASSIVATE OVERALL
DISTANCE FROM END TO HOLE CENTER0.090 INCHES MINIMUM AND 0.090 INCHES MINIMUM AND 0.210 INCHES MAXIMUM0.210 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 119905?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119905?
119905 is a STANDOFF,THREADED,SPACING manufactured by Hama.
What is the NSN for 119905?
119905 is cataloged in the U.S. Government catalog under NSN 5340-01-012-3519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119905

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.