PartsTable
Technical Data Sheet
Download PDF

119727 — CABLE ASSEMBLY,POWER,ELECTRICAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

119727: CABLE ASSEMBLY,POWER,ELECTRICAL.

CABLE ASSEMBLY,POWER,ELECTRICAL. Key specifications include material: ASBESTOS OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.000 INCHES NOMINAL IN, center_hole_diameter: 0.625 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-654-4435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119727
NSN: 5330-00-654-4435
NIINs: 006544435, 017291919
FSC: 5330 — Packing and Gasket Materials
CAGE: 60145 — AEROSTAR GLOBAL LOGISTICS, INC. DBA AEROSTAR TECHNICAL SERVICES (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.000 INCHES NOMINAL IN
center_hole_diameter0.625 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classification1571-C- FSCM 60145 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-654-4435
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 119727 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 1571-C- FSCM 60145 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 1.000 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.188 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION1571-C- FSCM 60145 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER1.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.625 INCHES NOMINAL IN
MATERIALASBESTOS OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
1-119727Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 119727?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119727?
119727 is a CABLE ASSEMBLY,POWER,ELECTRICAL.
What parts can replace 119727?
There is 1 known substitute for 119727: 1-119727. Substitute compatibility should be verified for your specific system.
What is the NSN for 119727?
119727 is cataloged in the U.S. Government catalog under NSN 5330-00-654-4435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119727