PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1197156
1197156 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include overall_width: 6.900 INCHES NOMINAL IN, overall_height: 3.800 INCHES NOMINAL IN, overall_length: 9.900 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-537-7289, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1197156
NSN: 5340-01-537-7289
FSC: 5340
CAGE: 89875 — DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
overall_width6.900 INCHES NOMINAL IN
overall_height3.800 INCHES NOMINAL IN
overall_length9.900 INCHES NOMINAL IN
special_features3M ID 70-2007-1857-8; WALL BRACKET AND FOOT PUMP; MANUFACTURER DOES NOT SELL DIRECTLY; MUST BE PURCHASED THROUGH DISTRIBUTORS
NSN5340-01-537-7289
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1197156 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES3M ID 70-2007-1857-8; WALL BRACKET AND FOOT PUMP; MANUFACTURER DOES NOT SELL DIRECTLY; MUST BE PURCHASED THROUGH DISTRIBUTORS
OVERALL WIDTH6.900 INCHES NOMINAL IN
OVERALL HEIGHT3.800 INCHES NOMINAL IN
OVERALL LENGTH9.900 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
SC4286Upgraded Successor
successor cross-reference
successor
9201Upgraded Successor
successor cross-reference
successor
TB102200-3BInterchangeable
interchangeable cross-reference
interchangeable
64-1066-1Interchangeable
interchangeable cross-reference
interchangeable
10-3070Interchangeable
interchangeable cross-reference
interchangeable
M9201Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1197156?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1197156?
1197156 is a BRACKET,MOUNTING.
What parts can replace 1197156?
There are 10 known substitutes for 1197156: SC4286, 9201, TB102200-3B and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1197156?
1197156 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-537-7289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1197156

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026