PartsTable
Technical Data Sheet
Download PDF

1197101FPC6 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1197101FPC6: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 50.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 0.875 INCHES NOMINAL IN, center_hole_diameter: 0.485 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN, cross-sectional_height: 1.000 INCHES NOMINAL IN, material_document_and_classification: MIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-509-9865, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1197101FPC6
NSN: 5330-00-509-9865
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hardness_rating50.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter0.875 INCHES NOMINAL IN
center_hole_diameter0.485 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
cross-sectional_height1.000 INCHES NOMINAL IN
material_document_and_classificationMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-509-9865
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1197101FPC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.000 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL DIAMETER: 0.875 INCHES NOMINAL IN
•
COLOR: BLACK
•
CENTER HOLE DIAMETER: 0.485 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT1.000 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-15624 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER0.875 INCHES NOMINAL IN
COLORBLACK
CENTER HOLE DIAMETER0.485 INCHES MINIMUM AND 0.495 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
561-6985067-61Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
9000S6202-1197101PC6Reference document
Same NSN cross-reference
Reference document — Secondary reference
9000S6202-11971Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-R-15624CL150Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 1197101FPC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1197101FPC6?
1197101FPC6 is a PACKING,PREFORMED.
What parts can replace 1197101FPC6?
There are 4 known substitutes for 1197101FPC6: 561-6985067-61, 9000S6202-1197101PC6, 9000S6202-11971 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1197101FPC6?
1197101FPC6 is cataloged in the U.S. Government catalog under NSN 5330-00-509-9865. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1197101FPC6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.