PartsTable
Technical Data Sheet
PartsTable / MRO / 11969
11969 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include shape: FLAT, width: 0.343 INCHES NOMINAL IN, material: STEEL ALLOY, thickness: 0.250 INCHES NOMINAL IN, bore_shape: STRAIGHT, design_type: SOLID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-0004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11969
NSN: 3110-00-198-0004
FSC: 3110
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
shapeFLAT
width0.343 INCHES NOMINAL IN
materialSTEEL ALLOY
thickness0.250 INCHES NOMINAL IN
bore_shapeSTRAIGHT
design_typeSOLID
temp_rating-65.0 FAHRENHEIT MINIMUM AND 2.750 FAHRENHEIT MAXIMUM DEGF
wire_insertNOT INCLUDED
corner_shapeSQUARE ALL CORNERS
end_diameter0.1950 INCHES MINIMUM AND 0.2050 INCHES MAXIMUM IN
flange_width0.0620 INCHES NOMINAL IN
pattern_typeAMERICAN
NSN3110-00-198-0004
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11969 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
SHIELD QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
11969Interchangeable
interchangeable cross-reference
interchangeable
4233A26Interchangeable
interchangeable cross-reference
interchangeable
100861Interchangeable
interchangeable cross-reference
interchangeable
623216-3Interchangeable
interchangeable cross-reference
interchangeable
483016Interchangeable
interchangeable cross-reference
interchangeable
21-11616Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11969?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11969?
11969 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11969?
There are 25 known substitutes for 11969: 11969, 4233A26, 100861 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11969?
11969 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-0004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11969

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026