PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 119610
119610 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: WOOL OVERALL, overall_width: 0.188 INCHES NOMINAL IN, overall_length: 10.312 INCHES NOMINAL IN, style_designator: RECTANGULAR, cross-sectional_width: 0.188 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119610
NSN: 5330-00-004-3207
FSC: 5330
CAGE: 88807 — NEAC COMPRESSOR SERVICE USA INC (USA)
SPECIFICATIONS
materialWOOL OVERALL
overall_width0.188 INCHES NOMINAL IN
overall_length10.312 INCHES NOMINAL IN
style_designatorRECTANGULAR
cross-sectional_width0.188 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
NSN5330-00-004-3207
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 119610 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: WOOL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
CROSS-SECTIONAL WIDTH: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALWOOL OVERALL
OVERALL WIDTH0.188 INCHES NOMINAL IN
OVERALL LENGTH10.312 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE
CROSS-SECTIONAL WIDTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
T-244-MInterchangeable
interchangeable cross-reference
interchangeable
72-700476-1Interchangeable
interchangeable cross-reference
interchangeable
MS35431-3Interchangeable
interchangeable cross-reference
interchangeable
119610Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 119610?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119610?
119610 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 119610?
There are 4 known substitutes for 119610: T-244-M, 72-700476-1, MS35431-3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 119610?
119610 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-004-3207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119610

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026