PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1195490
1195490 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND STEEL OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.938 INCHES NOMINAL IN, overall_length: 3.938 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 3.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-248-2092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1195490
NSN: 5330-00-248-2092
FSC: 5330
CAGE: 93334 — ATWOOD FENCE CO INC (USA)
SPECIFICATIONS
materialASBESTOS AND STEEL OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.938 INCHES NOMINAL IN
overall_length3.938 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter3.031 INCHES NOMINAL IN
bolt_hole_quantity4
lubrication_methodCOATED
lubrication_materialGRAPHITE BOTH SIDES
outside_corner_radius0.406 INCHES NOMINAL IN
cross-sectional_thickness0.063 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND METALLIC MATERIALS
NSN5330-00-248-2092
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1195490 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 3.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
LUBRICATION MATERIAL: GRAPHITE BOTH SIDES
•
LUBRICATION METHOD: COATED
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER3.031 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH3.938 INCHES NOMINAL IN
LUBRICATION MATERIALGRAPHITE BOTH SIDES
OVERALL WIDTH3.938 INCHES NOMINAL IN
LUBRICATION METHODCOATED
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.406 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
17815Interchangeable
interchangeable cross-reference
interchangeable
17875Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 25Interchangeable
interchangeable cross-reference
interchangeable
MS15701-276Interchangeable
interchangeable cross-reference
interchangeable
2237609Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1195490?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1195490?
1195490 is a GASKET.
What parts can replace 1195490?
There are 7 known substitutes for 1195490: 17815, 17875, GGG-C-755 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1195490?
1195490 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-248-2092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1195490

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026