PartsTable
Technical Data Sheet
Download PDF

119439 — RESONATOR,CAUITY

✓ Government record, cited
Equip · MRO · MRO_GENERAL
PRODUCT OVERVIEW

119439: RESONATOR,CAUITY.

The Equip 11943x series Active Optical Cable (AOC) is a cabling technology that accepts the same electrical inputs as a traditional copper cable but uses optical fibre between the connectors to extend HDMI signals with zero loss or latency. Our hybrid cable design consists of optical fibres and copper wires. The high-speed TMDS signals are transmitted through the optical multimode fibres, while the low frequency control signals are transmitted through the copper wires.

The range of active optical leads give you up to 100m of distance without a drop of signal quality or the requirement of a separate power supply. This part is cataloged in the U.S. Government catalog under NSN 5307-00-025-8269, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 119439
NSN: 5307-00-025-8269
NIINs: 000258269, 001174254, 006588634, 012675915
FSC: 5307 — Studs
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL COMP 4130
thread_class3A NUT THREAD A
thread_length0.438 INCHES NOMINAL NUT THREAD IN
overall_length0.938 INCHES NOMINAL IN
locking_featureSELF-CLINCHING HEAD
special_featuresPWB 1;SWITCH 5;RESISTOR ARRAY 3;INTEGRATED CIRCUIT 13;CAPACITOR 1;RESISTOR 1
style_designatorLOCKED IN
thread_directionRIGHT-HAND STUD THREAD
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.190 INCHES NUT THREAD IN
thread_pitch_diameters+0.2187 TO 0.2204 INCHES STUD THREAD IN
thread_quantity_per_inch32 NUT THREAD
NSN5307-00-025-8269
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 119439 · Equip ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM SERRATED PORTION TO NUT END: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES NOMINAL NUT THREAD IN
•
STYLE DESIGNATOR: LOCKED IN
•
THREAD PITCH DIAMETERS: +0.2187 TO 0.2204 INCHES STUD THREAD IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE
•
DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD: 0.153 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM SERRATED PORTION TO NUT END0.500 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES NOMINAL NUT THREAD IN
THREAD LENGTH0.284 INCHES NOMINAL STUD THREAD IN
STYLE DESIGNATORLOCKED IN
THREAD PITCH DIAMETERS+0.2187 TO 0.2204 INCHES STUD THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH0.938 INCHES NOMINAL IN
DISTANCE FROM SERRATED PORTION TO END OF STUD THREAD0.153 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
SUBSTITUTES & CROSS-REFERENCES 5
1016-07-8AReference document
Same NSN cross-reference
Reference document — Secondary reference
SS1342-3-8AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
3X119439Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BACS21S9-8ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
92597-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 119439?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119439?
119439 is a RESONATOR,CAUITY manufactured by Equip. It is classified as a MRO (MRO_GENERAL).
What parts can replace 119439?
There are 5 known substitutes for 119439: 1016-07-8A, SS1342-3-8A, 3X119439 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 119439?
119439 is cataloged in the U.S. Government catalog under NSN 5307-00-025-8269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119439