PartsTable
Technical Data Sheet
PartsTable / MRO / 11926
11926 ✓ Verified by PartsTable
Legrand · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include color: GOLD, shape: RECTANGULAR, width: 3.750 INCHES NOMINAL IN, height: 0.500 INCHES NOMINAL IN, length: 2.750 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-180-1175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11926
NSN: 3110-00-180-1175
FSC: 3110
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
colorGOLD
shapeRECTANGULAR
width3.750 INCHES NOMINAL IN
height0.500 INCHES NOMINAL IN
length2.750 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialPLASTIC
end_styleSHORT TWISTED HOOK BOTH ENDS
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
head_styleFLAT CHAMFER
body_length0.875 INCHES NOMINAL IN
design_typeOPEN
NSN3110-00-180-1175
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 11926 · Legrand ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.9995 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
BORE DIAMETER0.9995 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
11926Interchangeable
interchangeable cross-reference
interchangeable
1904452Interchangeable
interchangeable cross-reference
interchangeable
81-5/8Interchangeable
interchangeable cross-reference
interchangeable
981-5/8Interchangeable
interchangeable cross-reference
interchangeable
3371083Interchangeable
interchangeable cross-reference
interchangeable
3370783Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11926?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11926?
11926 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11926?
There are 20 known substitutes for 11926: 11926, 1904452, 81-5/8 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11926?
11926 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-180-1175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11926

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026