PartsTable
Technical Data Sheet
Download PDF

11925C6-17A — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11925C6-17A: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, grip_length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, head_height: 0.115 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-128-5123, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11925C6-17A
NSN: 5305-01-128-5123
FSC: 5305 — Screws
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
grip_length1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
head_height0.115 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
head_diameter0.756 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
thread_length0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES THREADS
fastener_length1.687 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
special_featuresFURNISHED WITH ONE O-RING
thread_directionRIGHT-HAND
NSN5305-01-128-5123
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11925C6-17A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.115 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.687 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
HEAD HEIGHT0.115 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
FASTENER LENGTH1.687 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
THREAD LENGTH0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 6
HT4020-6-17AReference document
Same NSN cross-reference
Reference document — Secondary reference
WC8137-6-17AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
HT8137-6-17ASReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
110179-6-17ASReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
BM33024V6-17UReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10115171Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11925C6-17A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11925C6-17A?
11925C6-17A is a SCREW,CLOSE TOLERANCE.
What parts can replace 11925C6-17A?
There are 6 known substitutes for 11925C6-17A: HT4020-6-17A, WC8137-6-17A, HT8137-6-17AS and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11925C6-17A?
11925C6-17A is cataloged in the U.S. Government catalog under NSN 5305-01-128-5123. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11925C6-17A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.