PartsTable
Technical Data Sheet
Download PDF

119129-2 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

119129-2: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.044 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN, diameter: 0.125 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, material: STEEL COMP 303 OVERALL, head_style: FLAT CHAMFER, undercut_width: 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-410-8185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119129-2
NSN: 5315-00-410-8185
NIINs: 004108185, 014970405
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
height0.044 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
diameter0.125 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
materialSTEEL COMP 303 OVERALL
head_styleFLAT CHAMFER
undercut_width0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
first_end_styleCHAMFERED
effective_length0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
style_designatorGROOVE
pin_head_diameter0.218 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
undercut_diameter0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
NSN5315-00-410-8185
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 119129-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: FPS436,FSCM 37695 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
UNDER HEAD LENGTH: 0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.218 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONFPS436,FSCM 37695 MFR REF SINGLE TREATMENT RESPONSE OVERALL
UNDER HEAD LENGTH0.209 INCHES MINIMUM AND 0.216 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.218 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.125 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 119129-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119129-2?
119129-2 is a PIN,GROOVED,HEADED.
What is the NSN for 119129-2?
119129-2 is cataloged in the U.S. Government catalog under NSN 5315-00-410-8185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119129-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.