11909V5L4-1 — SCREW,CLOSE TOLERANCE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

11909V5L4-1: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: OVAL COUNTERSUNK, grip_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.468 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-027-5253, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

11909V5L4-1

NSN: 5305-01-027-5253
FSC: 5305 — Screws
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	OVAL COUNTERSUNK
grip_length	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class	3A A
grip_diameter	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter	0.468 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
thread_length	0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
surface_finish	32.0 MICROINCHES GRIP
fastener_length	0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
internal_drive_style	HIGH-TORQUE
NSN	5305-01-027-5253

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES THREADS

•

FASTENER LENGTH: 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: OVAL COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	32.0 MICROINCHES GRIP
FASTENER LENGTH	0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN
THREAD LENGTH	0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	OVAL COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
GRIP DIAMETER	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 2

ST3M466V5L4-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HT4028L5-4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 11909V5L4-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 11909V5L4-1?

11909V5L4-1 is a SCREW,CLOSE TOLERANCE.

What parts can replace 11909V5L4-1?

There are 2 known substitutes for 11909V5L4-1: ST3M466V5L4-1, HT4028L5-4. Substitute compatibility should be verified for your specific system.

What is the NSN for 11909V5L4-1?

11909V5L4-1 is cataloged in the U.S. Government catalog under NSN 5305-01-027-5253. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

11909V5L4-1 — SCREW,CLOSE TOLERANCE

Request a Quote — 11909V5L4-1