11909V4L2-1 — SCREW,CLOSE TOLERANCE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

11909V4L2-1: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: OVAL COUNTERSUNK, grip_length: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN, head_diameter: 0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-021-6845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

11909V4L2-1

NSN: 5305-01-021-6845
FSC: 5305 — Screws
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	OVAL COUNTERSUNK
grip_length	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class	3A A
grip_diameter	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
head_diameter	0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN
thread_length	0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
fastener_length	0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	100.0 DEGREES NOMINAL
internal_drive_style	HIGH-TORQUE
nominal_thread_diameter	0.250 INCHES IN
NSN	5305-01-021-6845

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.250 INCHES IN

•

HEAD STYLE: OVAL COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN

•

GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN

•

MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

FASTENER LENGTH	0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN
THREAD LENGTH	0.444 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.250 INCHES IN
HEAD STYLE	OVAL COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
GRIP LENGTH	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
GRIP DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLE	HIGH-TORQUE
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

HT4028L4-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST3M466V4L2-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 11909V4L2-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 11909V4L2-1?

11909V4L2-1 is a SCREW,CLOSE TOLERANCE.

What parts can replace 11909V4L2-1?

There are 2 known substitutes for 11909V4L2-1: HT4028L4-2, ST3M466V4L2-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 11909V4L2-1?

11909V4L2-1 is cataloged in the U.S. Government catalog under NSN 5305-01-021-6845. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

11909V4L2-1 — SCREW,CLOSE TOLERANCE

Request a Quote — 11909V4L2-1