PartsTable
Technical Data Sheet
Download PDF

11907-5L6 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11907-5L6: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-395-3441, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11907-5L6
NSN: 5305-00-395-3441
FSC: 5305 — Screws
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
thread_length0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
fastener_length0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-00-395-3441
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11907-5L6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.891 INCHES MINIMUM AND 0.921 INCHES MAXIMUM IN
THREAD LENGTH0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHIGH-TORQUE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 4
HT4024L5-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
HT4024L5-6-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
WC4024L5-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M455-5L6-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11907-5L6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11907-5L6?
11907-5L6 is a SCREW,CLOSE TOLERANCE.
What parts can replace 11907-5L6?
There are 4 known substitutes for 11907-5L6: HT4024L5-6, HT4024L5-6-1, WC4024L5-6 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11907-5L6?
11907-5L6 is cataloged in the U.S. Government catalog under NSN 5305-00-395-3441. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11907-5L6