PartsTable
Technical Data Sheet
Download PDF

11907-5L11 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11907-5L11: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-447-3787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11907-5L11
NSN: 5305-00-447-3787
FSC: 5305 — Screws
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
thread_length0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
fastener_length1.204 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-00-447-3787
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11907-5L11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.204 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
•
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.204 INCHES MINIMUM AND 1.234 INCHES MAXIMUM IN
THREAD LENGTH0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHIGH-TORQUE
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 6
ST3M455-5L11-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4024L5-11-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST3M455-5L11Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST3M455L5-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
11907-5L11-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HT4024L5-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11907-5L11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11907-5L11?
11907-5L11 is a SCREW,CLOSE TOLERANCE.
What parts can replace 11907-5L11?
There are 6 known substitutes for 11907-5L11: ST3M455-5L11-1, HT4024L5-11-1, ST3M455-5L11 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11907-5L11?
11907-5L11 is cataloged in the U.S. Government catalog under NSN 5305-00-447-3787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11907-5L11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.