PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 119054
119054 ✓ Verified by PartsTable
Hama · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BUSHING,TAPERED is a Hama tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL, overall_length: 1.500 INCHES NOMINAL IN, inside_diameter: 1.375 INCHES NOMINAL IN, special_features: TORQUE CAPACITY 4300 FT/LB FT, taper_included_angle: 8 DEGREES, tapered_portion_length: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-358-7900, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
119054
NSN: 5325-00-358-7900
FSC: 5325
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL
overall_length1.500 INCHES NOMINAL IN
inside_diameter1.375 INCHES NOMINAL IN
special_featuresTORQUE CAPACITY 4300 FT/LB FT
taper_included_angle8 DEGREES
tapered_portion_length1.500 INCHES NOMINAL IN
large_end_outside_diameter2.250 INCHES NOMINAL IN
NSN5325-00-358-7900
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 119054 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMETALLIC HARDNESS RATING: 40.0 NOMINAL SHORE DUROMETER A
•
FLANGE THICKNESS: 0.062 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.094 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.047 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.397 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
LARGE FLANGE OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN
•
GROMMET CONSTRUCTION TYPE: SOLID
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
NONMETALLIC HARDNESS RATING40.0 NOMINAL SHORE DUROMETER A
FLANGE THICKNESS0.062 INCHES NOMINAL IN
GROOVE WIDTH0.094 INCHES NOMINAL IN
HOLE DIAMETER0.047 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.397 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
LARGE FLANGE OUTSIDE DIAMETER0.766 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
OVERALL HEIGHT0.204 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
SMALL FLANGE OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
120 23/32Interchangeable
interchangeable cross-reference
interchangeable
1314Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
192491-9Interchangeable
interchangeable cross-reference
interchangeable
10328266Interchangeable
interchangeable cross-reference
interchangeable
PPR2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 119054?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 119054?
119054 is a BUSHING,TAPERED manufactured by Hama.
What parts can replace 119054?
There are 14 known substitutes for 119054: 120 23/32, 1314, GGG-D-751 and 11 more. Substitute compatibility should be verified for your specific system.
Is 119054 still available?
119054 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 119054

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026