PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 118S30
118S30 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,CLEVIS is a the manufacturer industrial component. Key specifications include head_style: BUTTON, head_height: 0.125 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.500 INCHES NOMINAL IN, thread_length: 0.323 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN, fastener_length: 2.646 INCHES MINIMUM AND 2.666 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-0539, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
118S30
NSN: 5306-00-151-0539
FSC: 5306
CAGE: 55284 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE-SOUTH BEND (WESTMOOR ST) (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
head_styleBUTTON
head_height0.125 INCHES NOMINAL IN
thread_class3A A
head_diameter0.500 INCHES NOMINAL IN
thread_length0.323 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
fastener_length2.646 INCHES MINIMUM AND 2.666 INCHES MAXIMUM IN
groove_diameter0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleSLOT
NSN5306-00-151-0539
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 118S30 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A A
•
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM FIRST HOLE IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH LBS
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3A A
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM FIRST HOLE IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HEAD DIAMETER0.500 INCHES NOMINAL IN
FASTENER LENGTH2.646 INCHES MINIMUM AND 2.666 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
27-850Interchangeable
interchangeable cross-reference
interchangeable
264560Interchangeable
interchangeable cross-reference
interchangeable
25415Interchangeable
interchangeable cross-reference
interchangeable
90537-50Interchangeable
interchangeable cross-reference
interchangeable
SSD1200Interchangeable
interchangeable cross-reference
interchangeable
2307-125Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 118S30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 118S30?
118S30 is a BOLT,CLEVIS.
What parts can replace 118S30?
There are 8 known substitutes for 118S30: 27-850, 264560, 25415 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 118S30?
118S30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-151-0539. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 118S30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026