PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 118A1583-11
118A1583-11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, special_features: BLACK COLOR, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0613, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
118A1583-11
NSN: 5340-00-598-0613
FSC: 5340
CAGE: 04615 — GENERAL ELECTRIC CO MISSILE AND SPACE VEHICLE DEPT OF DEFENSE ELECTRONIC DIVISION OF ELECTRONIC ATOMIC AND DEFENSE SYSTE (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.500 INCHES NOMINAL IN
special_featuresBLACK COLOR
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.5631 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.360 INCHES NOMINAL IN
NSN5340-00-598-0613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 118A1583-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.360 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.5631 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.360 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.125 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.5631 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
SPECIAL FEATURESBLACK COLOR
DIAMETER0.203 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
18-6Upgraded Successor
successor cross-reference
successor
0P80Upgraded Successor
successor cross-reference
successor
SK65-1730AUpgraded Successor
successor cross-reference
successor
A186Upgraded Successor
successor cross-reference
successor
30018-186Upgraded Successor
successor cross-reference
successor
242B634-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 118A1583-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 118A1583-11?
118A1583-11 is a CLAMP,LOOP.
What parts can replace 118A1583-11?
There are 8 known substitutes for 118A1583-11: 18-6, 0P80, SK65-1730A and 5 more. Substitute compatibility should be verified for your specific system.
Is 118A1583-11 still available?
118A1583-11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 118A1583-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026