PartsTable
Technical Data Sheet
Download PDF

11885-5L17 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11885-5L17: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, head_diameter: 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-102-0313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11885-5L17
NSN: 5305-01-102-0313
FSC: 5305 — Screws
CAGE: 4WL75 — CAMCAR LLC DIV CAMCAR LLC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK
grip_length1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
head_diameter0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
thread_length0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
fastener_length1.578 INCHES MINIMUM AND 1.608 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle101.0 DEGREES NOMINAL
surface_treatmentALUMINUM AND CHROMATE OVERALL
internal_drive_styleHIGH-TORQUE
NSN5305-01-102-0313
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11885-5L17 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.578 INCHES MINIMUM AND 1.608 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.578 INCHES MINIMUM AND 1.608 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
GRIP DIAMETER0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
SURFACE TREATMENTALUMINUM AND CHROMATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
HT4068-5-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
3M927-5L17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11885-5L17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11885-5L17?
11885-5L17 is a SCREW,CLOSE TOLERANCE.
What parts can replace 11885-5L17?
There are 2 known substitutes for 11885-5L17: HT4068-5-17, 3M927-5L17. Substitute compatibility should be verified for your specific system.
What is the NSN for 11885-5L17?
11885-5L17 is cataloged in the U.S. Government catalog under NSN 5305-01-102-0313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11885-5L17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.