PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1188342
1188342 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.151 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 2.562 INCHES NOMINAL IN, special_features: 0.062 IN. PILOT HOLE IN, style_designator: CIRCULAR.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-0035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1188342
NSN: 5330-00-292-0035
FSC: 5330
CAGE: 09652 — GENERAL MOTORS CORP BUICK MOTOR DIV (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.151 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter2.562 INCHES NOMINAL IN
special_features0.062 IN. PILOT HOLE IN
style_designatorCIRCULAR
aperture_diameter1.625 INCHES NOMINAL IN
bolt_hole_quantity5
bolt_circle_diameter2.125 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-292-0035
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1188342 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.562 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
BOLT CIRCLE DIAMETER: 2.125 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.151 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.562 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
SPECIAL FEATURES0.062 IN. PILOT HOLE IN
STYLE DESIGNATORCIRCULAR
BOLT CIRCLE DIAMETER2.125 INCHES NOMINAL IN
HOLE DIAMETER0.151 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER1.625 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
BOLT HOLE QUANTITY5
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
369A4518Interchangeable
interchangeable cross-reference
interchangeable
1516395Interchangeable
interchangeable cross-reference
interchangeable
16-0308-1Interchangeable
interchangeable cross-reference
interchangeable
123088Interchangeable
interchangeable cross-reference
interchangeable
G-209-1.5Interchangeable
interchangeable cross-reference
interchangeable
1018437Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1188342?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1188342?
1188342 is a GASKET.
What parts can replace 1188342?
There are 11 known substitutes for 1188342: 369A4518, 1516395, 16-0308-1 and 8 more. Substitute compatibility should be verified for your specific system.
Is 1188342 still available?
1188342 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1188342

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026