PartsTable
Technical Data Sheet
11877 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR NETWORK,FIXED,FILM is a the manufacturer industrial component. Key specifications include special_features: LOMBARDINI TIMING BELT, COG, WEIGHT .50,, body_construction: SOLID, mounting_hole_type: THRU HOLE, end_attachment_style: RAISED FACE, SQUARE BOTH ENDS, end_item_identification: STRYKER, part_name_assigned_by_controlling_agency: SLIDE BLOCK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-524-3450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11877
NSN: 5340-00-524-3450
FSC: 5340
CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
special_featuresLOMBARDINI TIMING BELT, COG, WEIGHT .50,
body_constructionSOLID
mounting_hole_typeTHRU HOLE
end_attachment_styleRAISED FACE, SQUARE BOTH ENDS
mounting_hole_quantity2
end_item_identificationSTRYKER
part_name_assigned_by_controlling_agencySLIDE BLOCK
NSN5340-00-524-3450
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11877 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: ANODIZE
MATERIAL: ALUMINUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4041 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE
MATERIALALUMINUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURESBRAND PER SOLAR SPEC 4-6
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4041 ASSN STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
854-22Upgraded Successor
successor cross-reference
successor
360617SInterchangeable
interchangeable cross-reference
interchangeable
120731Interchangeable
interchangeable cross-reference
interchangeable
CD4068BInterchangeable
interchangeable cross-reference
interchangeable
932648-1BInterchangeable
interchangeable cross-reference
interchangeable
7152AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11877?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11877?
11877 is a RESISTOR NETWORK,FIXED,FILM.
What parts can replace 11877?
There are 9 known substitutes for 11877: 854-22, 360617S, 120731 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11877?
11877 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-524-3450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11877