PartsTable
Technical Data Sheet
Download PDF

118572 — 118572

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

118572: 118572.

The 118572 is a Hama industrial component. Key specifications include overall_width: 4.000 INCHES NOMINAL IN, overall_height: 0.400 INCHES NOMINAL IN, overall_length: 5.500 INCHES NOMINAL IN, special_features: PWB 1,MICROCKT 45,CAP 11,RES 9, features_provided: ELECTROSTATIC SENSITIVE, end_item_identification: RADAR SYSTEM,MAR,SEEK IGLOO,P/N 7326377G1,AN/FPS-117. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-282-1037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 118572
NSN: 5305-00-282-1037
NIINs: 002821037, 011682518
FSC: 5305 — Screws
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
overall_width4.000 INCHES NOMINAL IN
overall_height0.400 INCHES NOMINAL IN
overall_length5.500 INCHES NOMINAL IN
special_featuresPWB 1,MICROCKT 45,CAP 11,RES 9
features_providedELECTROSTATIC SENSITIVE
end_item_identificationRADAR SYSTEM,MAR,SEEK IGLOO,P/N 7326377G1,AN/FPS-117
criticality_code_justificationCBBL
NSN5305-00-282-1037
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 118572 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: ROUND
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 1S STYLE
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD HEIGHT0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
FASTENER LENGTH0.250 INCHES NOMINAL IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEROUND
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1S STYLE
INTERNAL DRIVE STYLESLOT
MATERIALSTEEL OVERALL
HEAD DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 118572?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 118572?
118572 is a 118572 manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 118572?
118572 is cataloged in the U.S. Government catalog under NSN 5305-00-282-1037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 118572