PartsTable
Technical Data Sheet
Download PDF

11841-5H20-45 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11841-5H20-45: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, grip_length: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, head_height: 0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN, thread_length: 0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-272-8536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11841-5H20-45
NSN: 5306-01-272-8536
FSC: 5306 — Bolts
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
grip_length1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
head_height0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
thread_length0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
fastener_length1.786 INCHES MINIMUM AND 1.816 INCHES MAXIMUM IN
special_featuresTHD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B THD; INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE IN UNTHK SHANK; DISTANCE FROM HEAD TO BEGINNING OF INJECTION PORT 0.450 IN. IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
NSN5306-01-272-8536
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11841-5H20-45 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.786 INCHES MINIMUM AND 1.816 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED WASHER DIAMETER: 0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
HEAD HEIGHT0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
FASTENER LENGTH1.786 INCHES MINIMUM AND 1.816 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM IN
THREAD LENGTH0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
3M1043-5H20-45Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11841-5H20-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11841-5H20-45?
11841-5H20-45 is a BOLT,CLOSE TOLERANCE.
What parts can replace 11841-5H20-45?
There is 1 known substitute for 11841-5H20-45: 3M1043-5H20-45. Substitute compatibility should be verified for your specific system.
What is the NSN for 11841-5H20-45?
11841-5H20-45 is cataloged in the U.S. Government catalog under NSN 5306-01-272-8536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11841-5H20-45

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.