PartsTable
Technical Data Sheet
Download PDF

11841 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

11841: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, body_length: 0.875 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, body_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-154-0903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11841
NSN: 5330-00-154-0903
NIINs: 001540903, 007069421, 008454721, 011515546, 012035548, 012106969, 015732805, 015906459
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
body_length0.875 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
body_diameter0.312 INCHES NOMINAL IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE PRIMARY
terminal_typeWIRE LEAD
turn_quantity10 SINGLE COMPONENT SINGLE PRIMARY
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeENCAPSULATED
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
NSN5330-00-154-0903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11841 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 2.004 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 7.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
HOUSING BORE DIAMETER: 2.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER2.004 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING7.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
HOUSING BORE DIAMETER2.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
COLORBLACK
SUBSTITUTES & CROSS-REFERENCES 9
13-463-4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
221551Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
509A40Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4501458-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4501458Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
34631Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11841?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11841?
11841 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11841?
There are 9 known substitutes for 11841: 13-463-4, 221551, 509A40 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11841?
11841 is cataloged in the U.S. Government catalog under NSN 5330-00-154-0903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11841