PartsTable
Technical Data Sheet
Download PDF

11833-5H11 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11833-5H11: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: SPLINE DRIVE SHEAR HEAD, grip_length: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN, head_height: 0.187 INCHES NOMINAL IN, grip_diameter: 0.311 INCHES NOMINAL IN, thread_length: 0.467 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-526-3902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11833-5H11
NSN: 5306-01-526-3902
FSC: 5306 — Bolts
CAGE: 59563 — REID PRODUCTS INC. DBA REID PRODUCTS INC (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleSPLINE DRIVE SHEAR HEAD
grip_length0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
head_height0.187 INCHES NOMINAL IN
grip_diameter0.311 INCHES NOMINAL IN
thread_length0.467 INCHES NOMINAL IN
fastener_length1.139 INCHES MINIMUM AND 1.186 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
head_minor_diameter0.517 INCHES NOMINAL IN
end_item_identificationFIGHTER AIRCRAFT - FIRST (F18 E/F)
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
criticality_code_justificationAGAV
NSN5306-01-526-3902
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11833-5H11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.187 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.139 INCHES MINIMUM AND 1.186 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.467 INCHES NOMINAL IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
•
CRITICALITY CODE JUSTIFICATION: AGAV
•
HEAD STYLE: SPLINE DRIVE SHEAR HEAD
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.187 INCHES NOMINAL IN
FASTENER LENGTH1.139 INCHES MINIMUM AND 1.186 INCHES MAXIMUM IN
THREAD LENGTH0.467 INCHES NOMINAL IN
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
CRITICALITY CODE JUSTIFICATIONAGAV
HEAD STYLESPLINE DRIVE SHEAR HEAD
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
HEAD MINOR DIAMETER0.517 INCHES NOMINAL IN
GRIP DIAMETER0.311 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 5
122896-5H11Reference document
Same NSN cross-reference
Reference document — Secondary reference
VCG0002-5H11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AIC688-5H11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S397-5H11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M747-5H11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11833-5H11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11833-5H11?
11833-5H11 is a BOLT,CLOSE TOLERANCE.
What parts can replace 11833-5H11?
There are 5 known substitutes for 11833-5H11: 122896-5H11, VCG0002-5H11, AIC688-5H11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11833-5H11?
11833-5H11 is cataloged in the U.S. Government catalog under NSN 5306-01-526-3902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11833-5H11

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.