PartsTable
Technical Data Sheet
Download PDF

11833-3-9 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11833-3-9: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: SPLINE DRIVE SHEAR HEAD, grip_length: 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN, head_height: 0.140 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.359 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-726-3497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11833-3-9
NSN: 5330-00-726-3497
NIINs: 007263497, 014819420
FSC: 5330 — Packing and Gasket Materials
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleSPLINE DRIVE SHEAR HEAD
grip_length0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM IN
head_height0.140 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.359 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
thread_length0.331 INCHES NOMINAL IN
fastener_length0.878 INCHES MINIMUM AND 0.925 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
head_minor_diameter0.447 INCHES MINIMUM AND 0.456 INCHES MAXIMUM IN
end_item_identificationF18 E/F
NSN5330-00-726-3497
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11833-3-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: DELTA
•
PERIPHERAL DIAMETER: 3.645 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.210 INCHES MINIMUM AND 3.240 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEDELTA
PERIPHERAL DIAMETER3.645 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.210 INCHES MINIMUM AND 3.240 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
PS1-30-5-339Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS28772Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS28772Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS28772-339Reference document
Same NSN cross-reference
Reference document — Secondary reference
1446-339Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS28772-339Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11833-3-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11833-3-9?
11833-3-9 is a PACKING,PREFORMED.
What parts can replace 11833-3-9?
There are 7 known substitutes for 11833-3-9: PS1-30-5-339, AS28772, SAE-AS28772 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11833-3-9?
11833-3-9 is cataloged in the U.S. Government catalog under NSN 5330-00-726-3497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11833-3-9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.