PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1183-D100-ITEM 39
1183-D100-ITEM 39 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL OVERALL, outside_diameter: 18.000 INCHES NOMINAL IN, style_designator: CIRCULAR ROUNDED, bolt_hole_diameter: 0.53 INCHES NOMINAL IN, fabrication_method: SOLID, bolt_circle_diameter: 0.700 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-694-4754, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1183-D100-ITEM 39
NSN: 5330-01-694-4754
FSC: 5330
CAGE: 60576 — LEWISTON FOREST PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER NATURAL OVERALL
outside_diameter18.000 INCHES NOMINAL IN
style_designatorCIRCULAR ROUNDED
bolt_hole_diameter0.53 INCHES NOMINAL IN
fabrication_methodSOLID
bolt_circle_diameter0.700 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
center_hole_diameter16.000 INCHES NOMINAL IN
end_item_identificationC0/H2 BURNER
cross-sectional_thickness0.125 INCHES NOMINAL IN
largest_bolt_hole_quantity6
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
smallest_bolt_hole_quantity6
NSN5330-01-694-4754
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1183-D100-ITEM 39 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SMALLEST BOLT HOLE QUANTITY: 6
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER HOLE DIAMETER: 16.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 18.000 INCHES NOMINAL IN
•
LARGEST BOLT HOLE QUANTITY: 6
•
FABRICATION METHOD: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
SMALLEST BOLT HOLE QUANTITY6
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER HOLE DIAMETER16.000 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER18.000 INCHES NOMINAL IN
END ITEM IDENTIFICATIONC0/H2 BURNER
LARGEST BOLT HOLE QUANTITY6
FABRICATION METHODSOLID
BOLT HOLE DIAMETER0.53 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER0.700 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
14192Interchangeable
interchangeable cross-reference
interchangeable
708Interchangeable
interchangeable cross-reference
interchangeable
C54597Interchangeable
interchangeable cross-reference
interchangeable
3952674C1Interchangeable
interchangeable cross-reference
interchangeable
07-0201-0192Interchangeable
interchangeable cross-reference
interchangeable
0073-509P1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1183-D100-ITEM 39?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1183-D100-ITEM 39?
1183-D100-ITEM 39 is a GASKET.
What parts can replace 1183-D100-ITEM 39?
There are 6 known substitutes for 1183-D100-ITEM 39: 14192, 708, C54597 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1183-D100-ITEM 39?
1183-D100-ITEM 39 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-694-4754. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1183-D100-ITEM 39

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026