PartsTable
Technical Data Sheet
Download PDF

11826137 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11826137: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.002 INCHES NOMINAL IN, diameter: 0.005 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT, special_features: 0.8 MM BY 1.0 MM SLOT ACROSS CENTER OF HEAD MM, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-034-1580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11826137
NSN: 5315-01-034-1580
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
height0.002 INCHES NOMINAL IN
diameter0.005 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT
special_features0.8 MM BY 1.0 MM SLOT ACROSS CENTER OF HEAD MM
style_designatorSTRAIGHT
pin_head_diameter0.006 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
under_head_length0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
NSN5315-01-034-1580
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11826137 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDER HEAD LENGTH: 0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.006 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
•
DIAMETER: 0.005 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
HEIGHT: 0.002 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
UNDER HEAD LENGTH0.013 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.006 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN
DIAMETER0.005 INCHES NOMINAL IN
HEAD STYLEFLAT
HEIGHT0.002 INCHES NOMINAL IN
SPECIAL FEATURES0.8 MM BY 1.0 MM SLOT ACROSS CENTER OF HEAD MM
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
5315PL2207179Reference document
Same NSN cross-reference
Reference document — Informative reference only
5315010341580Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 11826137?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11826137?
11826137 is a PIN,STRAIGHT,HEADED.
What parts can replace 11826137?
There are 2 known substitutes for 11826137: 5315PL2207179, 5315010341580. Substitute compatibility should be verified for your specific system.
What is the NSN for 11826137?
11826137 is cataloged in the U.S. Government catalog under NSN 5315-01-034-1580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11826137

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.