PartsTable
Technical Data Sheet
Download PDF

118240-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

118240-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 2.000 INCHES NOMINAL IN, second_leg_length: 3.250 INCHES NOMINAL IN, first_leg_thickness: 0.063 INCHES NOMINAL IN, second_leg_thickness: 0.063 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-059-5941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
118240-1
NSN: 5340-01-059-5941
FSC: 5340 — Hardware, Commercial
CAGE: 38200 — DRS TECHNOLOGIES CANADA LTD (CAN)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length2.000 INCHES NOMINAL IN
second_leg_length3.250 INCHES NOMINAL IN
first_leg_thickness0.063 INCHES NOMINAL IN
second_leg_thickness0.063 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-059-5941
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 118240-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 3.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE
•
SECOND LEG THICKNESS: 0.063 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.063 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 2.000 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 5052
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH3.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8,H34 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.063 INCHES NOMINAL IN
FIRST LEG THICKNESS0.063 INCHES NOMINAL IN
FIRST LEG LENGTH2.000 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 5052
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 118240-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 118240-1?
118240-1 is a BRACKET,ANGLE.
What is the NSN for 118240-1?
118240-1 is cataloged in the U.S. Government catalog under NSN 5340-01-059-5941. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 118240-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.