PartsTable
Technical Data Sheet
PartsTable / MRO / 118001
118001 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include phase: SINGLE INPUT, material: STEEL BODY, thickness: 0.3125 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM IN, duty_cycle: CONTINUOUS, flat_depth: 0.016 INCHES MINIMUM AND 0.026 INCHES MAXIMUM SINGLE END IN, key_height: 0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-8001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 118001
NSN: 5315-00-011-8001
FSC: 5315
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
phaseSINGLE INPUT
materialSTEEL BODY
thickness0.3125 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM IN
duty_cycleCONTINUOUS
flat_depth0.016 INCHES MINIMUM AND 0.026 INCHES MAXIMUM SINGLE END IN
key_height0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
body_length0.938 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
power_rating0.0111 HORSEPOWER OUTPUT
winding_typeINDUCTION-SHADED POLE
body_diameter0.250 INCHES NOMINAL IN
cubic_measure0.052 CUBIC INCHES
overall_width3.281 INCHES IN
NSN5315-00-011-8001
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 118001 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY SIZE DESIGNATION: WOODRUFF 28
•
THICKNESS: 0.3125 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 2330 OVERALL
•
STYLE DESIGNATOR: ROUND BOTTOM RELIEVED ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
KEY HEIGHT: 0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
STARTING EDGE RADIUS: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
KEY SIZE DESIGNATIONWOODRUFF 28
THICKNESS0.3125 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM IN
OVERALL LENGTH1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
MATERIALSTEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 2330 OVERALL
STYLE DESIGNATORROUND BOTTOM RELIEVED ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES OVERALL
KEY HEIGHT0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
STARTING EDGE RADIUS0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
STARTING EDGE SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
300ADPInterchangeable
interchangeable cross-reference
interchangeable
1-180-01Interchangeable
interchangeable cross-reference
interchangeable
1-132-02Interchangeable
interchangeable cross-reference
interchangeable
C26750Interchangeable
interchangeable cross-reference
interchangeable
318514Interchangeable
interchangeable cross-reference
interchangeable
318514 ITEM 10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 118001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 118001?
118001 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 118001?
There are 11 known substitutes for 118001: 300ADP, 1-180-01, 1-132-02 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 118001?
118001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-8001. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 118001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026