118-11737 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

118-11737: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.068 INCHES NOMINAL IN, center_hole_diameter: 0.856 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-415-2198, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

118-11737

NSN: 5331-00-415-2198
FSC: 5331 — O-ring
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.068 INCHES NOMINAL IN
center_hole_diameter	0.856 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-415-2198

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.068 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.856 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.068 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.856 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

OTHER ITEMS IN FSC 5331 — O-ring

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924

SUBSTITUTES & CROSS-REFERENCES 6

MS9386-118ESReference document

Same NSN cross-reference

Reference document — Secondary reference

MS9386-118Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

SAE-AS9386Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

PRP118-11737Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

A-118TH1167Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-118 S355-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 118-11737?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 118-11737?

118-11737 is a O-RING.

What parts can replace 118-11737?

There are 6 known substitutes for 118-11737: MS9386-118ES, MS9386-118, SAE-AS9386 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 118-11737?

118-11737 is cataloged in the U.S. Government catalog under NSN 5331-00-415-2198. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

118-11737 — O-RING

Request a Quote — 118-11737