PartsTable
Technical Data Sheet
PartsTable / MRO / 118-047
118-047 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include length: 0.188 INCHES NOMINAL SQUARE END IN, material: STEEL OVERALL, head_style: FLAT/TINNER'S, head_height: 0.036 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN, shank_style: STRAIGHT, thread_length: 0.750 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5320-00-011-8047, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 118-047
NSN: 5320-00-011-8047
FSC: 5320
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
length0.188 INCHES NOMINAL SQUARE END IN
materialSTEEL OVERALL
head_styleFLAT/TINNER'S
head_height0.036 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
shank_styleSTRAIGHT
thread_length0.750 INCHES MINIMUM IN
flute_quantity3
heat_treatmentANNEALED OVERALL
overall_length1.938 INCHES NOMINAL IN
shank_diameter0.168 INCHES MINIMUM IN
fastener_length0.188 INCHES NOMINAL IN
section_quantity1
NSN5320-00-011-8047
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 118-047 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
SHANK DIAMETER: 0.125 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.036 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT/TINNER'S
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FASTENER LENGTH: 0.188 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1008 OVERALL
•
HEAD MAJOR DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
HEAT TREATMENT: ANNEALED OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SHANK DIAMETER0.125 INCHES NOMINAL IN
HEAD HEIGHT0.036 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
HEAD STYLEFLAT/TINNER'S
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FASTENER LENGTH0.188 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OVERALL
HEAD MAJOR DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
HEAT TREATMENTANNEALED OVERALL
SHANK STYLESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
15211Interchangeable
interchangeable cross-reference
interchangeable
C54190Interchangeable
interchangeable cross-reference
interchangeable
10132Interchangeable
interchangeable cross-reference
interchangeable
118-047Interchangeable
interchangeable cross-reference
interchangeable
511208Interchangeable
interchangeable cross-reference
interchangeable
SB30MMKInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 118-047?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 118-047?
118-047 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 118-047?
There are 8 known substitutes for 118-047: 15211, C54190, 10132 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 118-047?
118-047 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5320-00-011-8047. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 118-047

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026