PartsTable
Technical Data Sheet
Download PDF

117PM10059-1 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

117PM10059-1: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL BALL, shank_style: INTERNALLY THREADED, thread_class: 3B, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: RIGID, overall_length: 2.6560 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-633-7285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117PM10059-1
NSN: 3110-00-633-7285
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL BALL
shank_styleINTERNALLY THREADED
thread_class3B
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
alignment_typeRIGID
overall_length2.6560 INCHES NOMINAL IN
shank_diameter0.5100 INCHES MINIMUM AND 0.5120 INCHES MAXIMUM IN
shield_quantity2
inner_ring_width0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
special_featuresNO. 50 HOLE DRILL THRU SHANK 0.3120 IN. FROM SHANK END IN
style_designatorSINGLE ROW, BALL
NSN3110-00-633-7285
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 117PM10059-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.5100 INCHES MINIMUM AND 0.5120 INCHES MAXIMUM IN
•
SHANK THREAD LENGTH: 1.0000 INCHES MINIMUM AND 1.0310 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: SINGLE ROW, BALL
•
OVERALL OUTSIDE DIAMETER: 1.1260 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.5100 INCHES MINIMUM AND 0.5120 INCHES MAXIMUM IN
SHANK THREAD LENGTH1.0000 INCHES MINIMUM AND 1.0310 INCHES MAXIMUM IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2190 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
SHIELD QUANTITY2
STYLE DESIGNATORSINGLE ROW, BALL
OVERALL LENGTH2.6560 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.1260 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 117PM10059-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117PM10059-1?
117PM10059-1 is a BEARING,BALL,ROD END.
What is the NSN for 117PM10059-1?
117PM10059-1 is cataloged in the U.S. Government catalog under NSN 3110-00-633-7285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117PM10059-1