PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 117882
117882 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: PLASTIC, overall_width: 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, overall_length: 14.490 INCHES MINIMUM AND 14.500 INCHES MAXIMUM IN, surface_finish: POLISHED, oval_end_radius: 0.500 INCHES NOMINAL IN, style_designator: OVAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-8806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117882
NSN: 5340-00-598-8806
FSC: 5340
CAGE: 52542 — SYSTRON-DONNER CORP MICROWAVE/INSTRUMENT DIV (USA)
SPECIFICATIONS
materialPLASTIC
ply_quantity1
overall_width0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
overall_length14.490 INCHES MINIMUM AND 14.500 INCHES MAXIMUM IN
surface_finishPOLISHED
oval_end_radius0.500 INCHES NOMINAL IN
style_designatorOVAL
overall_thickness0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
material_transparencyCLEAR
NSN5340-00-598-8806
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 117882 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: DOUBLE FLANGE
•
GROOVE DIAMETER: 0.188 INCHES NOMINAL IN
•
BOTTOM FLANGE WIDTH: 0.163 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE/TOP FLANGE DIAMETER: 0.375 INCHES NOMINAL IN
•
BOTTOM FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
TOP FLANGE WIDTH: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORDOUBLE FLANGE
GROOVE DIAMETER0.188 INCHES NOMINAL IN
BOTTOM FLANGE WIDTH0.163 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
OUTSIDE/TOP FLANGE DIAMETER0.375 INCHES NOMINAL IN
OVERALL HEIGHT0.313 INCHES NOMINAL IN
BOTTOM FLANGE DIAMETER0.250 INCHES NOMINAL IN
TOP FLANGE WIDTH0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
2920137-9Interchangeable
interchangeable cross-reference
interchangeable
940-9Interchangeable
interchangeable cross-reference
interchangeable
F12675-9Interchangeable
interchangeable cross-reference
interchangeable
700371Interchangeable
interchangeable cross-reference
interchangeable
7409Interchangeable
interchangeable cross-reference
interchangeable
799252Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 117882?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117882?
117882 is a BUMPER.
What parts can replace 117882?
There are 14 known substitutes for 117882: 2920137-9, 940-9, F12675-9 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 117882?
117882 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-8806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117882

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026