PartsTable
Technical Data Sheet
Download PDF

11784071 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11784071: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include first_leg_width: 2.720 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN, second_leg_style: SQUARE, second_leg_width: 3.470 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN, fabrication_method: WELDED, first_leg_hole_diameter: 0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN, second_leg_hole_diameter: 0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-110-7532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11784071
NSN: 5340-01-110-7532
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
first_leg_width2.720 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
second_leg_styleSQUARE
second_leg_width3.470 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
fabrication_methodWELDED
first_leg_hole_diameter0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
second_leg_hole_diameter0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
second_leg_hole_arrangement_styleFOUR HOLES
first_leg_distance_between_hole_centers_along_width2.000 INCHES NOMINAL IN
first_leg_distance_between_hole_centers_along_length0.875 INCHES NOMINAL IN
second_leg_distance_between_hole_centers_along_width2.562 INCHES NOMINAL IN
second_leg_distance_between_hole_centers_along_length2.562 INCHES NOMINAL IN
first_leg_distance_from_edge_to_hole_center_along_width0.370 INCHES NOMINAL IN
NSN5340-01-110-7532
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11784071 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.470 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.000 INCHES NOMINAL IN
•
SECOND LEG HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 3.470 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.470 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.370 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.470 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.000 INCHES NOMINAL IN
SECOND LEG HOLE DIAMETER0.281 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
SECOND LEG WIDTH3.470 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.470 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.370 INCHES NOMINAL IN
FIRST LEG WIDTH2.720 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
SECOND LEG STYLESQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11784071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11784071?
11784071 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 11784071?
11784071 is cataloged in the U.S. Government catalog under NSN 5340-01-110-7532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11784071

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.