The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM IN, first_leg_length: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-075-8989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11781685
NSN:5340-01-075-8989 FSC:5340 — Hardware, Commercial CAGE:19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM IN
first_leg_length
0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM IN
special_features
SECOND LEG HAS EIGHT ADDITIONAL HOLES VARYING IN DIA. AND FOUR TERMINALS,P/N SE079B02S
style_designator
ANGLE
second_leg_length
2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
surface_treatment
CHROMATE
first_leg_hole_diameter
0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
NSN
5340-01-075-8989
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 1.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
1.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER
0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.174 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
5.220 INCHES MINIMUM AND 5.280 INCHES MAXIMUM IN
SECOND LEG LENGTH
2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
THREE HOLES
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11781685?
11781685 is a BRACKET,ANGLE.
What parts can replace 11781685?
There is 1 known substitute for 11781685: 8680408-501. Substitute compatibility should be verified for your specific system.
What is the NSN for 11781685?
11781685 is cataloged in the U.S. Government catalog under NSN 5340-01-075-8989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.