PartsTable
Technical Data Sheet
Download PDF

11778615-3 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11778615-3: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.095 INCHES NOMINAL IN, heat_treatment: AS FABRICATED, overall_height: 0.018 INCHES NOMINAL IN, outside_diameter: 0.206 INCHES NOMINAL IN, surface_treatment: TIN AND CADMIUM AND PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-463-8248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11778615-3
NSN: 5310-00-463-8248
FSC: 5310 — Nuts and Washers
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.095 INCHES NOMINAL IN
heat_treatmentAS FABRICATED
overall_height0.018 INCHES NOMINAL IN
outside_diameter0.206 INCHES NOMINAL IN
surface_treatmentTIN AND CADMIUM AND PASSIVATE OVERALL
material_thickness0.0055 INCHES MINIMUM AND 0.0065 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationD.T.D 924 FSCM 27489 MFR REF 1ST TREATMENT RESPONSE AND D.T.D 904 FSCM 27489 MFR REF 2ND TREATMENT RESPONSE AND D.E.F. 130 FSCM 27489 MFR REF 3RD TREATMENT RESPONSE OVERALL
NSN5310-00-463-8248
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11778615-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: D.T.D 924 FSCM 27489 MFR REF 1ST TREATMENT RESPONSE AND D.T.D 904 FSCM 27489 MFR REF 2ND TREATMENT RESPONSE AND D.E.F. 130 FSCM 27489 MFR REF 3RD TREATMENT RESPONSE OVERALL
•
HEAT TREATMENT: AS FABRICATED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.206 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0055 INCHES MINIMUM AND 0.0065 INCHES MAXIMUM IN
•
SURFACE TREATMENT: TIN AND CADMIUM AND PASSIVATE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.018 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIOND.T.D 924 FSCM 27489 MFR REF 1ST TREATMENT RESPONSE AND D.T.D 904 FSCM 27489 MFR REF 2ND TREATMENT RESPONSE AND D.E.F. 130 FSCM 27489 MFR REF 3RD TREATMENT RESPONSE OVERALL
HEAT TREATMENTAS FABRICATED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.206 INCHES NOMINAL IN
MATERIAL THICKNESS0.0055 INCHES MINIMUM AND 0.0065 INCHES MAXIMUM IN
SURFACE TREATMENTTIN AND CADMIUM AND PASSIVATE OVERALL
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.095 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
LS501-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
3326-3001-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
KS94136-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LSD6908Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310-99-9436075Reference document
Same NSN cross-reference
Reference document — Informative reference only
DP1001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11778615-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11778615-3?
11778615-3 is a WASHER,SPRING TENSION.
What parts can replace 11778615-3?
There are 7 known substitutes for 11778615-3: LS501-12, 3326-3001-001, KS94136-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11778615-3?
11778615-3 is cataloged in the U.S. Government catalog under NSN 5310-00-463-8248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11778615-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.